OGP SmartScope ZIP is a video-measurement product that offers multisensor (video, laser, touch probe, rotary) versatility. All advanced models in the product line are specially configured for the toughest imaging applications. The Lite models provide ZIP benefits in value configurations. The tool is equipped with contact and non-contact probes that deploy and retract, under program control, for fully automatic operation. All models of SmartScope ZIP accommodate parts and fixtures of many sizes.
The Heatcon HCS9200B Hot Bonder is an electrical heating composite repair system, monitored and controlled via computer. The HCS9200B consists of two zones with separate, multiple sensor inputs that control the heat application, vacuum, and time necessary to cure critically sensitive composite resins and adhesives. Handles on three sides of the compact and portable unit make for convenient maneuverability and provide a composite repair technician with complete control of the hot-bond curing process.
Credit: Dedienne Aerospace
Designed by the Dedienne Aerospace engineering department, the shipping stand LEAP-1B has been optimized to carry out the BOEING 737 Max engine by road and airfreight—and to ensure its easy installation. A distinguishing factor of the LEAP-1B shipping stand is its low weight of 2,350 kg, compared to the engine's 3,490 kg, making it one of the most-efficient stands ever produced by Dedienne Aerospace.
8tree’s dentCHECK provides accurate and consistent measurements for dent-mapping and blend-out analysis. The high-speed and SRM-compliant product provides ‘go/no-go’ results in less than 2 sec. No external components or power cables are needed.
Esterline Total Air Temperature (TAT) Probe RP350 is certified for Airbus long-range (A330 and A340) and single-aisle aircraft (A320-family airplanes). The RP350 offers an MTBF greater than 50,000 hr., including heater cable greater than 500,000 hr., and a high accuracy in both severe icing conditions and in dry air (better than +/-0.4C in cruise with Deicing Heat Error (DHE) lower than 1C at low speed). Its TAT probe is compliant with JAR25 icing-certification requirements and is compliant with MIL-P-27723-E Deicing requirements. The ceramic-sensing element is a calibrated dual-platinum RTD. The RP350 is fully interchangeable with 102EH2EB TAT Sensor.
Credit: Dukane Seacom
Dukane Seacom, a HEICO company, created the first FAA/EASA TSO/ETSO-C121b certified 90-day underwater-locator beacon (ULB). The new 90-day operational requirements enter into effect on Dec. 1, 2015. In addition to exceeding a longer operational requirement, the DK120/90 also offers a 7-year battery-replacement cycle. An exchange program is currently being offered for airlines who would like to convert from 30-day beacons to 90-day beacons through Dukane Seacom's distribution partner, Seal Dynamics. With over 40 years of industry experience, Dukane Seacom has the largest install base of underwater-locator beacons for commercial, military, and business jets, with over 50,000 ULB units installed on aircraft.
GH SWET System from SolidHeat is designed to heat superalloys for welding at elevated temperatures. The system uses an argon purge chamber, which removes oxygen from the work area to avoid oxidation. The GH SWET System also has a working area ergonomically designed to guarantee operator comfort. The equipment can be height-adjusted and the armrest can also be adjusted by angle. All the process-parameters indicators are located in the front panel, so the operator can easily control them. The specifically designed coil provides the proper heating pattern to the part and maximizes the efficiency of the induction-heating power supply, while still allowing for the part's easy insertion and removal. The system’s features include: programmed time delay for chamber purging; ramp up, hold, ramp down temperature control; closed loop temperature control via infrared pyrometer; and control holds for constant power during the welding process.
Credit: ANKER Aviation
Anker Aviation carpets meet all international safety standards and focus on environmental requirements of modern air travel. As a manufacturer of Aviation carpets since the early 1960s, Anker offers environmentally friendly aviation carpets with reduced consumption of raw material and fuel resources, reduced carbon dioxide, reduced waste, waste-water and gaseous pollution. Anker Aviation carpets produced from econyl fibers are made from up-cycled post-production and post-consumer waste.
Credit: STG Aerospace
LiTeMood from STG Aerospace is a plug-and-play, programmable LED cabin-lighting system, designed to retrofit commercial aircraft cabins. Developed with a focus on airline needs, liTeMood® can be easily installed during an overnight check, using all existing mounting points and connectors and requires no aircraft wiring modifications. Up to 40 kg lighter than typical original-fit fluorescent lighting, liTeMood® also consumes 70% less power, thereby delivering important fuel-savings and environmental benefits.
Interiors, tools and part companies that were in the exhibition hall at Aviation Week’s MRO Asia-Pacific, held Nov. 3-5 in Singapore.