Business Aviation

Staff
Nov. 26-28—Central Europe Private Aviation (CEPA) Expo Prague 2013, Prague Congress Center, Prague, www.cepaexpo.com/ Dec. 5-6—2013 International Aviation Issues Seminar, Washington, D.C., www.aci-na.org/event/2421 Dec. 9-11—2013 ACI-NA/ACC Airport Planning & NEPA Workshop, Washington, D.C., www.aci-na.org/event/1039 Dec. 9-13—ICAO Air Services Negotiation Conference, Durbana International Convention Center, and Arena, Durban, South Africa , http://www.icao.int/Meetings/ICAN2013/Pages/default.aspx
Business Aviation

Kerry Lynch
Despite news of a resurging U.S. manufacturing industry, U.S. export competitiveness in manufacturing continues to decline, according to a new report by the Manufacturers Alliance for Productivity and Innovation. In 2000, Europe and the U.S. remained atop the world’s exporters, with Japan trailing the U.S. by a little more than one-third the total exports. Since that time, China has leapfrogged both the U.S. and Europe. U.S. exports, in terms of dollar value, have grown 70% since 2000, marking the third slowest growth among the world’s top 11 exporters.
Business Aviation

Perry Inhofe, the son of Sen. Jim Inhofe (R-Okla.), reported a control problem and that the left engine of his MU-2B-25 had shut down shortly before the aircraft crashed while maneuvering on approach to Tulsa International Airport (TUL) on Nov. 10, the National Transportation Safety Board says. Perry Inhofe, 52, the pilot and sole person aboard the aircraft, died in the crash.

Staff
Embraer received a purchase agreement from Arab Wings for a Lineage 1000. The aircraft, scheduled for delivery in early 2014, will be managed for an undisclosed customer and available for charter. The aircraft, based in Jordan, will join an Embraer Legacy 600 and 650 on Arab Wings’ operating certificate.
Business Aviation

Staff
Rockwell Collins was recently selected by Jet Aviation Basel to provide its Venue cabin management and entertainment system and high-definition Airshow 3D Moving Map system for an Airbus A340CJ business jet. The A340CJ will be the largest aircraft to date to carry the equipment, which has been installed on more than 300 aircraft including a number of large VIP jets. HD monitors will be installed throughout the aircraft, along with wireless audio/video-on-demand capability for personal devices. Installation is slated to begin in the first half of 2014.
Business Aviation

Staff
EUROCOPTER FRANCE Model AS332C, AS332L, AS332L1, AS332L2, and EC225LP helicopters [Docket No. FAA-2013-0479; Directorate Identifier 2011-SW-070-AD; Amendment 39-17649; AD 2013-22-17] – requires inspecting the intermediate gearbox (IGB) fairing for a crack and inspecting the IGB fairing gutter, if installed, for a crack, separation, or interference. This AD is prompted by reports of cracks, separation of the IGB fairing from the gutter and attachment supports, and subsequent interference with the tail rotor (T/R) inclined drive shaft.
Business Aviation

Staff
RUSS PIGGOTT joined Boston JetSearch, Inc. to help manage the aircraft search and acquisition process for clients. Piggott formerly spent 14 years as a fighter pilot in the U.S. Air Force flying the F-16, and currently serves as a mission-ready F-15 pilot for the Massachusetts Air National Guard.
Business Aviation

Staff
CHAFIK HILAL was named managing director, Middle East, Turkey and Africa, for Rockwell Collins, effective Jan. 1. Hilal will lead and develop the company’s Commercial and Government Systems business interests in the region. He currently oversees Rockwell Collins government and military business interests in the region. Hilal has spent his professional career at Rockwell Collins, beginning in Government Systems.
Business Aviation

Staff
EMBRAER Model EMB-135ER, -135KE, -135KL, and -135LR airplanes; and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes [Docket No. FAA-2013-0868; Directorate Identifier 2013-NM-194-AD; Amendment 39-17650; AD 2013-22-18] – requires repetitive detailed inspections to detect discrepancies on the attaching parts of the lower eyelet fitting of the cockpit windshield center-post, and, if no discrepancy is found, a check to make sure the bolts are tight, and replacement of the attaching parts if necessary.
Business Aviation

Staff
BELL Model 430 helicopters [Docket No. FAA-2013-0491; Directorate Identifier 2008-SW-012-AD; Amendment 39-17609; AD 2013-20-03] – requires installing a placard on the instrument panel and revising the limitations section of the rotorcraft flight manual (RFM). This AD was prompted by several incidents of third-stage engine turbine wheel failures, which were caused by excessive vibrations at certain engine speeds during steady-state operations.
Business Aviation

Tony Osborne ([email protected])
Marenco Swisshelicopter is to unveil the first prototype of its SKYe SH09 single-engine light helicopter during a ceremony in Switzerland this week.

Staff
BELL Model 206B and 206L helicopters [Docket No. FAA-2013-0488; Directorate Identifier 2008-SW-002-AD; Amendment 39-17619; AD 2013-20-13] – requires installing a placard beneath the engine power dual tachometer and revising the operating limitations section of the rotorcraft flight manual (RFM). This AD was prompted by several incidents of third-stage engine turbine wheel failures, which were caused by excessive vibrations at certain engine speeds during steady-state operations.
Business Aviation

FAA October Business Jet Report
Click here to view the pdf U.S. Business Jet Flights, Monthly Trends U.S.
Business Aviation

Click here to view the pdf
Business Aviation

Tony Osborne ([email protected])
Boeing will fly a demonstrator of its P-8 Poseidon-based Maritime Surveillance capability in a Bombardier Challenger next year. Partner Field Aviation has begun modifying the business jet to carry a Selex 7000-series radar, mission system, electronic support measures (ESM) system as well as an electro-optical camera, which will turn the aircraft into Boeing’s Maritime Surveillance Aircraft offering.
Business Aviation

As defense manufacturers become accustomed to the prospect of lower Pentagon budgets, there is growing concern over the health of the supply chain, particularly the lower tiers and specifically small companies that may be the sole source of critical parts or a unique technology.

By William Garvey
For investors like Chen who want to try their hand at airplane-making, two more possibilities recently surfaced. First, Aerostar Aircraft Corp. is working to make good on the late designer Ted Smith's vision, by developing a turbofan-powered version of his Aerostar. A pressurized model, with PW615s below each wing, has been flying since July 25, when it lifted off the runway at Coeur d'Alene, Idaho, Airport, Aerostar's home field.
Business Aviation

By William Garvey
The other day I participated in a great general aviation tradition by lofting into brilliant blue skies with a pal in his Mooney Bravo and galloping eastward in a 220-kt. pursuit of a $100 hamburger. Well, to be squeakily factual, when figuring $6/gal. avgas at 20 gph, engine and maintenance reserve (his budget), and considering our pain d'Avignon spread actually comprised a croque madame, battered chicken, limonata, coffee and two chocolatey desserts (my treat), it was more like a $500 excursion. Fun, but pricey. A serious, industry-wide problem of long standing.

John Croft (Hyde County Airport, Engelhard, N.C.)
North Carolina seeks to lead agricultural UAV niche development.

Graham Warwick
Additive manufacturing has captured industry’s imagination, but even as the first parts appear inside jet engines, the technology’s possibilities are only just being realized. As researchers experiment with new materials and optimized designs made possible by 3-D printing, the potential scale of the revolution in manufacturing is becoming clearer.

Kerry Lynch
The FAA is proposing a policy that would require pilots and controllers with a body mass index (BMI) of 40 or more to be screened for obstructive sleep apnea (OSA) before obtaining a medical certificate. In a recent FAA Federal Air Surgeon’s Medical Bulletin, Federal Air Surgeon Fred Tilton says the agency is planning to soon release a policy that would require aviation medical examiners to calculate the BMI for airman and air traffic control specialist applicants.

Staff
MD HELICOPTERS Model MD900 helicopters [Docket No. FAA-2013-0486; Directorate Identifier 2010-SW-031-AD; Amendment 39-17622; AD 2013-20-16] – requires, for affected helicopters with certain main rotor blade (MRB) retention bolts installed, a daily check of the position of each bolt, a daily check and a repetitive inspection for a gap in each bolt, and, if necessary, removing and inspecting the bolt for a crack and replacing any cracked bolt with an airworthy bolt. This AD was prompted by multiple reports of in-service bolt failures.
Business Aviation

Staff
GE Aviation has joined the UK National Composites Centre (NCC) as a Tier 1 member, positioning GE’s Aerostructures and Dowty Propeller units to take an instrumental role in researching and developing new technologies for the design and manufacture of composite products. Based in Bristol, the NCC is the U.K. center of excellence for composite materials and manufacturing development, working with industry and academia.
Business Aviation

Kerry Lynch
Berkshire Hathaway is crediting increased share sales by its fractional ownership business NetJets for helping improve overall company revenue. NetJets is part of Berkshire Hathaway’s “other services” group, which also includes FlightSafety International, Dairy Queen, Business Wire, TTI and a range of other media outlets.

Kerry Lynch
Signature Flight Support, already the largest and fastest-growing fixed-base operation chain worldwide, is set to further its penetration in the Caribbean, winning a request for proposals for a new FBO at Port of Spain, Trinidad. The RFP, for a facility at Piarco International Airport, is the second RFP that Signature has won this year; Signature earlier captured a bid to build a $70 million facility at San Jose International Airport.