I did catch an action video ... of BF-5 being tugged to the elevator to head below deck for a fix.
BF-1, heavily instrumented for the trials, was down owing to a faulty cooling fan in the engine nacelle; this was repaired and the aircraft conducted flights later in the day after we departed the ship. BF-5, a production representative model, was having trouble with its thermal management subsystem.
Peter Wilson, a BAE test pilot, was able to test the F-35B landing at four headings, each 90-deg. apart. He says the testing validates the aircraft can conduct VLs at any heading on the ship.
The VLs were conducted on spots in the aft portion of the ship that have been treated with Thermion, a new heat resistant coating the includes ceramic and steel; it is a vast improvement over the current anti-skid coating used on the deck and might be applied to other F-35 ships in the future, says Joe Spitz, lead tester on deck for Naval Sea Systems Command.
During one of the tests, Wilson landed an F-35B with its nose off toward the port side of the deck and its engine and hot nozzle exhaust on the port side. During this test, the engine nozzle was just at the demarcation on the deck between the Thermion and baseline anti-skid coatings on the deck. The effects are obvious. The anti-skid coating is brown as a result of the intense heat, while the Thermion appears unaffected.
Spitz says that while the anti-skid coating typical on can handle F-35 operations, its service life could be compromised over time. So, the Navy is assessing whether it will outline decks – or at least portions to be used by the F-35B – with this Thermion material in the future. The performance tradeoff is cost; Thermion is more expensive, he says.
However, heat output is an issue also with the MV-22s landing on the decks of carriers and small-deck ships, so it is possible the Navy will take into account the operational use of these tiltrotor aircraft as it plots a way forward for the use of Thermion.
Below, the dark section on the right is the Thermion coating. You can see on the left where Wilson landed with the engine nozzle just over the divider between the Thermion and standard anti-skid -- the the latter a bit toasted.
The F-35Bs, made by Lockheed Martin, have also flown with internal weapons stores using a variety of inert AIM-120s, Jdams and Paveways. These were used to alter the aircraft’s center of gravity for approaches, VLs and STOs. Pilots on deck report not anomalies.
The insert weapons were stored on deck as seen below. First, you'll see the Jdams, followed by the AIM-120s with Paveways in the background of the second pic below.
Remember that testy F-35 Integrated Power Pack? Well, the USMC has welcomed it on deck with its own parking spot.
Finally, I couldn't help by include these two quick videos. I managed to get a first-class jump seat in the Block C MV-22 from VMX-22, a New River, NC, based unit used for test and evaluation of equipment for the Opsrey. Below is our wingman's launch from the Wasp.
And, at the request of the one-star on board, we did a flyby of the Wasp on our way back to Andrews AFB, Md. Thanks to the tiltrotor technology, we managed to travel roughly 200 mi. in about 35 minutes.
photos and video by Amy Butler